Mart Flow Control Valves

“Y” Strainer Valve is designed to distinct the debris from the pipelines and works as safeguard for the downstream machineries such as pumps, flow meters, steam traps, control valves, sensors and many more mechanical & critical devices. So, it is the device which is used for filtration, purification, to remove the solid particles from the flowing liquid. The Strainers arrest the debris such as solid waste, corrosion, welding metal in the pipelines. It minimizes shutdown time and repairs.
One should use a correct strainer for the given application. Please contact to the factory for correct installation position. The Strainers are generally used horizontally in the upstream side.
The Y Strainer – Purpose and Application"Y" or Wye strainers are no exception. While this strainer option is more flexible when compared with basket strainers, the "Y" strainers have a very limited installation. The "Y" type strainer purpose is a specific one and that is exactly what makes them ideal for the applications where they can be used. This means that understanding the "Y" strainer purpose and the applications that benefit from it are the best ways to get the results that you are looking for out of this strainer!
The y strainer purpose is to remove unwanted particles from steam, gas, or liquid using a straining element typically made of wire mesh. Using this mechanical process in pipelines helps to protect everything from pumps to steam traps. Y strainers are sometimes designed with “blow-off valves” to make the cleaning process easier.
Perhaps the largest benefit that comes from the y type strainer is its flexibility. It can be installed in a vertical or horizontal position, depending on the users’ preference. While this strainer type is already a cost-effective option, the size of y strainers can be reduced to save even more money. This also prevents using excess materials. Y strainers can be made of a variety of materials. The type of material you choose depends on the industry and application that is used. Any type of end that you might need is available as well. From socket to flanged, there is a y strainer out there with the end you need!Y Strainer ApplicationsThe industries where y strainers are best used are those that need constant protection from debris. The most universally common use for a y strainer is in steam applications. Due to its shape, a y strainer has no trouble handling the high pressure that steam applications endure.
Y strainers are often used in liquid applications. Sand and gravel are two very common types of debris that pose a big threat to liquid applications. When combined with water handling applications, y strainers aid in the protection of equipment that would be otherwise damaged or clogged by various unwanted particles.
Natural gas and air applications also benefit from being used with y strainers. Much like steam applications, natural gas and air environments have high pressure levels. These applications are also expected to put up with high temperatures, something that y strainers can easily endure.
Because of the variety of industries and applications where a y strainer can be used, the materials and customization of these strainers must be done on a case-by-case basis. For example, carbon steel does not do well in extremely high temperatures or pressures, so it would be best to find a y strainer made of chrome-moly steel for steam or natural gas applications. Keeping in mind specificities when it comes to applications and industries will help ensure that you get the most from a y strainer.
If you have any questions or concerns regarding y strainer applications or uses, feel free to contact us anytime at +91 7016471756

Additional Information:

• Production Capacity: 2121
• Delivery Time: Standard
• Packaging Details: Standard

The side entry ball valve is a valve in which a ball is assembled from the inner part. The assembly is usually in three or two piece body. Each piece is assembled by use of a stud or bolt similar to joining two flange pieces. These valves are produced from forge metal. Each part of the body is forged and then they are assembled. Such construction helps to reduce defects that arise from casted valves. These valves are easy to assemble as components are easy to align. Side entry ball valves are the most widely used ball valves.
A side entry ball valve is designed to enhance high performance and it has a robust design as per international standards. Side entry ball valves contain metal soft or composite seats which can be configured with either double or single piston effect to enhance double block and bleed in both closed and open positions. Side entry ball valve manufacturers make the valves with forgings and independent bellows or springs loaded floating seats that are always kept in contact with the ball. This makes the valves a preferred choice for various demands such as cryogenic, low emission, high temperatures, crude oil, natural gas, transmission lines, transmission pipelines, measuring stations, compression, reinjection, and pumping units among others.

Side entry ball valve manufacturer make the valve with a spherical closing unit that helps in on/off flow control. The spherical unit has a bore through its center. When in the open position, a valve is kept in a position that aligns the bore or port to the pipeline direction. This allows fluid to flow through it. When you rotate this valve for an angle of 90o, the port becomes normal to the path of flow which closes the valve and prevents fluid flow. Inside the side entry ball valve, the most common design is the one that uses the two-way design. This helps the fluid to flow linearly from the entry to the exit. Side entry ball valves have been known to have a long service life and reliable seal even if the seal is not used for a long time. Side entry valves are known to tolerate contaminated fluid better compared to other valves. These valves have also been used to control fluid flow rate. However, the use of this valve to control fluid flow rate is not common because accurate control of fluid is not easy. 

The key features of a soft seated side entry ball valve are: Offers a good sealing. Limited operating temperatures. Cheaper compared to metallic seated valves. Uses soft seat materials which are nylon, PTFE, Devlon, PEEK among others. Not suitable for use in dirty services to avoid its damage. Metal seated side entry ball valve 


The key features of a metallic-seated side entry ball valve are: There is direct metallic contact between the ball and seat ring. They are suitable for abrasive applications and cases where soft-seated valves cannot be damaged by the temperature. They can accept leakages according to ISO 5208 rate D. The seat and ball contact surfaces are hardened to enhance wear resistance and scratching that arises from solid materials contained in the fluid. Metallic seats rarely bend easily relative to soft seats under pressure. Two-piece side entry ball valve 

This is a side entry ball valve made in two pieces where the ball is held in its position using a stud. This type of side entry ball valve can have a reduced bore or full bore design. 
This is a side entry ball valve that has one centerpiece and two end pieces. This type of side entry ball valve is mostly online maintainable. When the body bolts are removed and only one is kept, the body can easily be swung away by use of the last bolt as a fulcrum which helps to do any maintenance or installation on the valve. This helps to reduce the time taken on maintenance. 

Additional Information:

• Item Code: MB29S8
• Production Capacity: 21000
• Delivery Time: 4 WEEKS
• Packaging Details: SEA AND AIR WORTHY EXPORT PACKING